收藏我们   ENGLISH  
客服QQ
  点击这里给我发消息505255386
微信
  微信公共号
关键词查询
范围:  
提 交
《工程塑料应用》 2019年第05期
DOI:10.3969/j.issn.1001-3539.2019.05.020
汽车活动接触座注塑件镶拼式侧抽芯注塑模具设计
梅益,鄢天灿,李亚勇,吴巧,甘盛霖,杨幸雨
贵州大学机械工程学院,贵阳 550025 
Design of Injection Mold with Inserted Side Core Pulling for Automobile Movable Contact Seat
Mei Yi, Yan Tiancan, Li Yayong, Wu Qiao, Gan Shenglin, Yang Xingyu
College of Mechanical Engineering, Guizhou University, Guiyang 550025, China 
摘要:以内部结构复杂的汽车活动接触座塑件为例,分析了薄壁件压板镶拼式侧抽芯三板注塑模具中的关键技术。塑件含有多孔、深槽和侧向凸台等多种细节特征,运用UG NX软件进行塑件特征建模,在UG8.5 Mold Wizard应用模块下保证各个机构间互不干涉。根据活动接触座的结构特点,采用压板镶拼式抽芯机构实现塑件侧面特征成型。设计了阶梯形推杆,保证塑件顺利脱模。为避免塑件表面产生气泡、凹陷等缺陷,在模具分型面上开设了燕尾槽进行排气。关键点在于运用Moldflow软件对塑件缺陷进行模拟分析,给出了合理的优化参数,最终选择了熔体温度为280℃、保压时间为8 s、充填压力为95 MPa的工艺组合,改善了零件的使用性能。设计的模具结构紧凑、工作稳定,对同类模具设计具有一定参考价值。 
Abstract:Taking the plastic part of the moving contact seat of automobile with complex internal structure as an example, the key technology of the injection mold of thin-walled parts with side core pulling and laminating was analyzed. The plastic part contains many details such as porous, deep groove and lateral convex platform. UG NX software was used to model the characteristics of plastic parts. Under UG8.5 Mold Wizard application module, it ensured that each mechanism did not interfere with each other. According to the structural characteristics of the movable contact seat, the side feature forming of the plastic parts was realized by the core-pulling mechanism of pressing plate and inserting type. The ladder push rod was designed to ensure the smooth demoulding of plastic parts. In order to avoid the defects such as bubbles and depressions on the surface of plastic parts, a dovetail groove was set up on the parting surface of the mould for exhaust. The key point was using Moldflow software to simulate and analyze the defects of plastic parts, and reasonable optimization parameters were given. Finally, the process combination of melt temperature 280℃, holding time 8 s and filling pressure 95 MPa was selected to improve the service performance of the parts. The designed die has compact structure and stable operation, which has certain reference value for similar die design. 
关键词:汽车活动接触座;压板镶拼式侧抽芯;模具设计;Moldflow 
Keywords:automotive movable contact seat; side core pulling by pressing plate mosaic; die design; Moldflow 
基金:贵州省科技计划项目(黔科合支撑[2019]2019),贵州省科技支撑计划项目(黔科合支撑[2018]2175) 
本文引用格式:
梅益,鄢天灿,李亚勇,等.汽车活动接触座注塑件镶拼式侧抽芯注塑模具设计[J].工程塑料应用,2019,47(5):105-109,121.
Mei Yi,Yan Tiancan,Li Yayong,et al. Design of injection mold with inserted side core pulling for automobile movable contact seat[J]. Engineering Plastics Application,2019,47(5):105-109,121. 

原文:
 
相似文章:
  注塑模具镶件智能设计系统
2020年第07期
  转轴零件注塑工艺分析及双色模具设计
2020年第06期
  帆船绳钩注塑模具设计与工艺优化
2020年第06期
  基于Moldflow与Workbench的底座塑件推杆配置优化及偏心注塑模设计
2020年第05期
  双层不同类型螺纹盖双内螺纹脱模机构及模具设计
2020年第05期
  基于最优拉丁超立方抽样方法和NSGA-II算法的注射成型多目标优化
2020年第03期
  欧式花洒本体注射模模流分析及结构设计
2020年第02期
  车门内饰板优化分析及模具设计
2020年第01期
  基于Moldflow技术的监控器底座注塑模具设计
2019年第11期
  展板支架连接件注塑模具设计与优化
2019年第10期
《工程塑料应用》杂志社 版权所有,未经授权禁止复制或者建立镜像
地址:山东省济南市天桥区田庄东路3号 邮编:250031
电话:0531-85878057 85878223 85878278 传真:0531-85947355
鲁ICP备05018524号-5